How to Make a Simplest Compact 1 Watt LED Driver Circuit at 220V 110V Mains Voltage

Circuit diagram.

Seetharaman’s words about the circuit: I am sending you a table lamp made from defunct energy saver lamp with broken tubes. CFL converted into LED lamp. Most of the components will be available in ones scrap box. Few components available in the CFL PCB also can be used.

Procedure
1. Carefully remove the broken glasses
2. Open the assembly carefully
3. Remove electronics and discard
4. Assemble the circuit in dot matrix PC or on a 1mm laminate sheet.
5. Cut a round laminate sheet with (scissor)
6. Mark the position of the 6 round holes on the sheet
7. Drill the holes to suit the LEDs to flush fit in the six holes
8. Use a dab of adhesive to keep the LED assembly in position
9. Close the assembly
10. Ensure the internal wiring does not touch each other
11. Now test on 230Volt AC
Your nice compact table lamp / puja room lamp / passage lamp is ready for use.